Eiki LC-XB43 Owner's Manual Page 61
- Page / 79
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
61
Be sure to reset the Filter counter after cleaning or replacing
the filters.
Resetting the Filter Counter
Maintenance and Cleaning
Turn off the projector, and unplug the AC power cord
from the AC outlet.
Turn the projector over and remove the filters by pulling
the latches upward.
1
2
Filters prevents dust from accumulating on the optical elements inside the projector. Should the filters become
clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup
and adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, clean the filters
immediately. Clean the filter by following the steps below.
Gently clean the filters by using a brush or rinse them
softly.
3
When rinsing the filters, dry them well. Replace the
filters properly. Make sure that the filters are fully
inserted to the projector.
4
CAUTION
Do not operate the projector with the filters
removed. Dust may accumulate on the optical
elements degrading picture quality.
Do not put anything into the air vents. Doing so
may result in malfunction of the projector.
RECOMMENDATION
We recommend avoiding dusty/smoky environments
when you operate the projector. Usage in these
environments may cause poor image quality.
When using the projector under dusty or smoky conditions,
dust may accumulate on a lens, LCD panels, or optical
elements inside the projector degrading the quality of a
projected image. When the symptoms above are noticed,
contact your authorized dealer or service station for proper
cleaning.
Note:
When reinserting these filters, be sure
that the slit part is facing the outer side.
Filters
Pull up and remove.
Cleaning the Filters
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Setting and
then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select Filter counter
and then press the SELECT button. Use the Point ▲▼
buttons to select Filter counter reset and then press
the SELECT button. Filter counter Reset? appears.
Select Yes to continue.
1
2
Filter counter
Filter counter Reset?
appears.
Select Yes, then another
confirmation box appears.
Select Yes again to reset
the Filter counter.
Another confirmation dialog box appears, select Yes to
reset the Filter counter.
3
H
- Multimedia Projector 1
- Owner's Manual 1
- Features and Design 2
- Table of Contents 3
- To the Owner 4
- Safety Instructions 5
- Moving the Projector 6
- Air Circulation 6
- : EIKI 8
- : EIKI International,Inc 8
- Rear Terminal 10
- Part Names and Functions 10
- Top Control 11
- Remote Control 12
- Remote Control Code 13
- Installation 14
- Connecting to a Computer 15
- Connecting to Video Equipment 16
- Connecting the AC Power Cord 18
- Basic Operation 19
- Turning Off the Projector 21
- or SELECT 22
- Menu Bar 23
- Zoom and Focus Adjustment 24
- Auto Setup Function 24
- Keystone 25
- Keystion 25
- Sound Adjustment 26
- Remote Control Operation 27
- • • • • • 28
- Computer Input 29
- Computer System Selection 31
- Auto PC adjustment 32
- Manual PC adjustment 33
- Image Mode Selection 35
- Image Adjustment 36
- Screen Size Adjustment 37
- Video Input 39
- Video System Selection 41
- Setting Menu 46
- Language 46
- Auto setup 47
- Logo select 49
- Logo PIN code lock 50
- Enter a Logo PIN code 51
- Logo PIN code change 51
- Ceiling 52
- Power management 52
- Off, CC1, CC2, CC3 or CC4 53
- Key lock 55
- PIN code lock 55
- Enter a PIN code 56
- Change the PIN code 56
- Fan Control Setting 57
- Factory default 58
- Filter counter 58
- Information 59
- Maintenance and Cleaning 60
- Resetting the Filter Counter 61
- Cleaning the Filters 61
- Cleaning the Projection Lens 62
- Slide Shutter 62
- Lamp Replacement 63
- Lamp replacement counter 64
- Reset? 64
- Appendix 65
- Menu Tree 69
- Projector Condition 71
- Technical Specifications 73
- Optional Parts 74
- PJ Link Notice 75
- Configurations of Terminals 76
- PIN Code Number Memo 77
- PIN Code Lock No 77
- Logo PIN Code Lock No 77
- Unit: inch(mm) 78
- Screw Holes for Ceiling Mount 78
- Screw: M4 78
- Depth: 0.472(12.0) 78
Related products and manuals for Projectors Eiki LC-XB43
Projectors Eiki EIP-SXG20 User Manual
(2 pages)
(2 pages)
Projectors Eiki LC-X800 Owner's Manual
(85 pages)
(85 pages)
Projectors Eiki EIP-1 Owner's Manual
(68 pages)
(68 pages)
Projectors Eiki LC-X7 User Manual
(24 pages)
(24 pages)
Projectors Eiki LC-WB200 Owner's Manual
(80 pages)
(80 pages)
Projectors Eiki NPC-1 User Manual
(2 pages)
(2 pages)
Projectors Eiki LC-4000 User Manual
(2 pages)
(2 pages)
Projectors Eiki LC-XB27 Owner's Manual
(72 pages)
(72 pages)
Projectors Eiki LC-XB41 Owner's Manual
(66 pages)
(66 pages)
Projectors Eiki LC-XB43N User Manual
(2 pages)
(2 pages)
Projectors Eiki LC-X2U Instruction Manual
(58 pages)
(58 pages)
Projectors Eiki LC-XB41N Owner's Manual
(80 pages)
(80 pages)
Projectors Eiki EIP-UHS100 Owner's Manual
(70 pages)
(70 pages)
Projectors Eiki LC-XS25A User Manual
(2 pages)
(2 pages)
Projectors Eiki LC-SD12 Owner's Manual
(52 pages)
(52 pages)
Projectors Eiki LC-5000U User Manual
(2 pages)
(2 pages)
Projectors Eiki LC-XNP4000 User Manual
(73 pages)
(73 pages)
Projectors Eiki LC-XBL21 User Manual
(24 pages)
(24 pages)
Projectors Eiki LC-XG400L User Manual
(24 pages)
(24 pages)
© 2020, manymanuals.com. All rights reserved. | 2.276 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals