Eiki LC-XB43 Owner's Manual download pdf (Page 32)

Auto PC adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal , Vertical ,

Clamp, Display area H and Display area V positions to conform to your computer.

PC adjust Menu

Auto PC adjustment

To store adjustment parameters

The adjusted parameters from the Auto PC adjustment can

be stored in the projector. Once the parameters are stored,

the setting can be done just by selecting a Mode (1–5) in

the PC System Menu (see page 31). See also “Store” on

page 34.

Note:

• Fine sync, Total dots, Horizontal and Vertical

position of some computers cannot be fully adjusted

with the Auto PC adjustment function. When the image

is not provided properly with this operation, manual

adjustments are required (pp.33-34).

• The Auto PC adjustment cannot be operated when 480i,

575i, 480p, 575p, 720p, 1035i or 1080i is selected in

the PC System Menu (p.31).

Press the MENU button to display the On-Screen

Menu. Use the Point ▲▼ buttons to select PC adjust

and then press the Point ► or the SELECT button.

Use the Point ▲▼ buttons to select Auto PC adj. and

then press the SELECT button.

Auto PC adj.

Menu Operation

Use Point ▲▼ buttons to select Auto PC

adj. and press the SELECT button.

Please wait... appears while the Auto PC

adjustment is in process.

Computer Input

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 78 79

No comments

Eiki LC-XB43 Owner's Manual Page 32