Eiki LC-XB43 Owner's Manual download pdf (Page 47)

Note:

• The Auto Keystone function cannot work

when the Ceiling feature is set

On in the

Setting Menu (p.52).

• Perfect correction of the image distortion

cannot be ensured with the Auto setup

function. If the distortion is not corrected

properly by pressing the AUTO SETUP

or AUTO SET button, adjust manually by

pressing the KEYSTONE button on the

remote control or selecting Keystone in the

Setting Menu (pp.25, 48).

• Fine sync, Total dots, Horizontal and

Vertical position of some computers

cannot be fully adjusted with the Auto PC

adjustment function. When the image is not

provided properly with this operation, manual

adjustments are required (pp.33-34).

Input search

This function detects the input signal automatically. When

a signal is found, the search will stop. Use the Point

▲▼

buttons to select one of the following options.

Off ......... Input search will not work.

On 1....... Input search works under the following situation.

– When pressing the AUTO SETUP button on

the top control.

– When pressing the AUTO SET button on the

remote control.

On 2....... Input search works under the following situation.

– When turning on the projector by pressing the

ON/STAND-BY button on the top control or the

remote control.

– When pressing the AUTO SET button on the

remote control.

– When pressing the AUTO SETUP button on

the top control.

– When the current input signal is cut off.*

* If the No show or Freeze function is active, cancel it to

activate the Input search. It is also unavailable when On-

Screen Menu is displayed.

Auto PC adj.

On. . . . . . .Enables Auto PC adjustment when pressing

the AUTO SET button on the remote control or

the AUTO SETUP button on the top control.

Off . . . . . .Disables Auto PC adjustment.

Auto Keystone

Auto . . . . Always works and corrects keystone distortion

according to the projector's tilt.

Manual . . .Works only when pressing the AUTO SETUP

button on the top control or the AUTO SET

button on the remote control.

Off . . . . . .Disables Auto Keystone.

Auto setup

Note:

• While Input search function is set to

On 1 or On 2, the

status of Input and Lamp are displayed every time the

signal is switched.

• Only the last selected input source can be detected.

• If the INPUT button on the top control or the

COMPUTER 1/2 buttons, VIDEO or S-VIDEO or

COMPONENT buttons on the remote control is pressed

during Input search is in progress, Input search will stop

and go back to the previous input signal.

• Auto PC adj. and Input search and Auto Keystone

functions cannot be set Off at the same time.

• Auto Keystone function corrects vertical distortion only,

not correct horizontal distortion.

This function enables Input search, Auto Keystone correction

and Auto PC adjustment by pressing the AUTO SETUP button

on the top control or the AUTO SET button on the remote

control. Settings for those functions can be altered as follows:

Language English

Menu position

Auto setup more...

Keystone

Background Blue

Display On

Logo

Ceiling On

Rear On

Power management Off

On start Off

Closed caption CC1

Standby mode Eco

1/2

Setting

Auto setup

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 78 79

Comments to this Manuals

No comments

Eiki LC-XB43 Owner's Manual Page 47

Comments to this Manuals

Related products and manuals for Projectors Eiki LC-XB43