Eiki LC-XB43 Owner's Manual download pdf (Page 25)

If a projected picture still has keystone distortion after

pressing the AUTO SETUP button on the top control or the

AUTO SET button on the remote control, correct the image

manually as follows:

Press the KEYSTONE button on the top control or on

the remote control to switch the Standard (for Vertical/

Horizontal) /Corner adjustment. The Standard or Corner

adjustment dialog box appears. Use the Point ▲▼◄►

buttons to correct the Standard or Corner distortion. The

Standard or Corner adjustment can be stored (see page

48).

Keystone Correction

Standard

Note:

• The white arrows indicate that there is no correction.

• A red arrow indicates the direction of correction.

• An arrow disappears at the maximum correction.

• If you press and hold the KEYSTONE button for

more than 3 seconds while the Standard or Corner

dialog box is being displayed, the Standard or Corner

correction will be released

• The Corner pattern can be set to

Off, Red, White or

Blue in the Corner pattern function. See "Keystone"

on page 48.

• The adjustable range is limited depending on the

input signal.

• Standard and Corner functions cannot be adjusted at

the same time. If one of the fuctions is adjusted, and

then the other one will be reset automatically.

• The corner keystone function may be canceled when

you set the Auto keystone function to Auto or Manual.

To avoid this, it is recommended to set the Auto

keystone function to Off while the corner keystone

function is activated.

Remote Control

AUTO SET button

Top Control

AUTO SETUP button

POINT ▲▼◄►

buttons

KEYSTONE button

Corner

Reduce the top left corner part

with the Point

►▼ buttons.

POINT ▲▼◄►

buttons

KEYSTONE button

Keystone

Reduce the top right corner part

with the Point

◄▼ buttons.

Keystone

Reduce the bottom left corner

part with the Point

►▲ buttons.

Reduce the bottom right corner

part with the Point ◄▲ buttons.

Press the KEYSTONE button on the top control or on the

remote control to switch Corner adjustment, press the

SELECT button on the remote control to select the corner

you want to adjust.

Basic Operation

Reduce the right part

with Point

► button.

Reduce the upper width

with the Point

▲ button.

Reduce the left part with

Point

◄ button.

Reduce the lower width

with the Point

▼ button.

Press the SELECT

button

Press the SELECT

button

Press the SELECT

button

Press the SELECT

button

Keystone

Keystion

The top left corner adjustment as an example:

Press the Point ▼

button

Press the Point

►

button

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 78 79

Comments to this Manuals

No comments

Eiki LC-XB43 Owner's Manual Page 25

Comments to this Manuals

Related products and manuals for Projectors Eiki LC-XB43