Eiki EIP-XSP2500 Owner's Manual download pdf (Page 35)

Trouble Shooting

No power Remedy

There is no power from the power

cord.

Plug the power cord into the AC inlet on the projector, and plug the power

cord into the power outlet.

Attempting to turn the projector on

again during the cooling process.

Wait until the cooling down process has completed.

No image/ Image

adjustment

Remedy

The video source is not turned on or

connected correctly.

Turn the video source on and check that the signal cable is connected

correctly.

The projector is not correctly

connected to the input signal device.

Check the connection.

The input signal has not been

correctly selected.

Select the correct input signal using MENU button on the projector or the

SOURCE button on the remote control.

The lens cover is still closed. Open the lens cover.

The projection lens is not correctly

focused.

Adjust the focus of the lens using the focus ring.

The projector and the screen are not

aligned properly.

Adjust the projection angle and direction as well as the height of the

projector if necessary.

The projector is not connected correctly.

Check audio cable if connect correctly.

The volume is set to minimum.

Adjust the volume.

No audio

Mute is turned on.

Press the MUTE button.

Remote control Remedy

The battery is out of power. Replace the battery with a new one.

There is an obstacle between the

remote control and the projector.

Remove the obstacle.

You are too far away from the

projector.

Stand within 5 meters of the projector.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41 42 43

Comments to this Manuals

No comments

Eiki EIP-XSP2500 Owner's Manual Page 35

Comments to this Manuals

Related products and manuals for Projectors Eiki EIP-XSP2500