Eiki EIP-XSP2500 Owner's Manual download pdf (Page 31)

Maintenance

Care of the Projector

The projector needs maintenance. The only thing that users need to do on a regular basis is to keep the

lens clean.

Never remove any parts of the projector except the lamp. Contact your dealer if other parts need to

replace.

Cleaning the Lens

Clean the lens whenever you notice dirt or dust on the surface.

Use a canister of compressed air to remove dust.

If there are dirt or smears, use lens-cleaning paper or moisten soft cloth with lens cleaner and gently wipe

the lens surface.

CAUTION

Never rub the lens with abrasive materials.

Cleaning the Projector Case

Before cleaning the case, turn the projector off via using the proper shutdown procedure as described in

"Power off the projector" on page 14 and unplug the power cord.

To remove dirt or dust, wipe the case with a soft, lint-free cloth.

To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral pH detergent. Then wipe

the case.

CAUTION

Never use wax, alcohol, benzene, thinner or other chemical detergents. These can damage the

case.

Storing the Projector

If you need to store the projector for an extended time, please follow the instructions below:

Make sure the temperature and humidity of the storage area are within the recommended range for the

projector. Please refer to "Specifications" on page 33 or consult your dealer about the range.

Retract the adjuster feet.

Remove the battery from the remote control.

Pack the projector in its original packing or equivalent.

Transporting the Projector

The projector shipped with its original packing or equivalent is recommended.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 42 43

No comments

Eiki EIP-XSP2500 Owner's Manual Page 31