Eiki LC-XB43N Owner's Manual download pdf (Page 59)

Configuring wireless LAN setting and security setting

Setting of WPS PIN code

1. Select “WPS PIN code” in the “Network security” and press Set button.

2. The eight-digit number in "WPS PIN code" window will appear, and set up this WPS PIN code of your

wireless access point according to the instructions manual of the access point.

3. After setting up the access point, press Set button on this "WPS PIN code" window within 2 minutes.

After configuration of the projector, the network between the access point and the projector will be

performed automatically.

4. The network setting will be updated after finishing configuration. Re-connect to the projector by

entering the new IP address on the browser.

Setting of WPS Push button

1. Select “WPS Push Button” in the “Network security” and press Set button to start WPS configuration.

2. Configure WPS of the access point within 2 minutes. After configuration of the access point, the

network between the access point and the projector will be performed automatically.

3. The network setting will be updated after finishing configuration. Re-connect to the projector by

entering the new IP address on the browser.

✐ When there is plural access points, WPS PIN code sets the connection vis-a-vis the access point whose the radio

wave strength is strongest. So, when setting WPS PIN code, please set the projector in the vicinity of the access

point which you want to connect. If the setting with WPS PIN code is not succeeded, please try the setting with

WPS Push button.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 149 150

No comments

Eiki LC-XB43N Owner's Manual Page 59