Eiki LC-XT9 User Manual download pdf (Page 41)

SETTING

On start

When this function is “On,” projector is automatically turned on just

by switching MAIN ON/OFF SWITCH on.

Note ; Be sure to turn projector off properly (refer to section

“TURNING OFF PROJECTOR” on P23). If projector is turned

off in wrong steps, On Start function does not operate

properly.

This projector provides eight different remote control codes (Code

1-Code 8); the factory-set, initial code (Code 1) and the other

seven codes (Code 2 to Code 8). This switching function prevents

remote control interference when operating several projectors or

video equipment at the same time.

For example operating the projector in “Code 7”, both the projector

and the remote control must be switched to “Code 7”.

To change the code for the projector;

Select a remote control code in this Setting Menu.

To change the code for the remote control;

Check the Reset Switch to "Use position" in the compartment lid

on back of the remote control.

And then while holding down the MENU button, press the IMAGE

button number of times corresponding to the remote control code

for the projector.

To reset the code for the remote control;

Slide the Reset Switch to "Reset position" in the compartment lid

on back of the remote control.

Remote control

When pressing the SELECT

button at Remote control, the

remote control code menu

appears.

Use position

Reset position

Reset switch

Lamp counter reset

This function returns all setting values except the lamp

counter to the factory default settings.

Closes SETTING MENU.

Quit

Factory default

This function is used to reset the lamp replace counter. When

replacing the projection lamp, reset the lamp replace counter

by using this function. See page 45 for operation.

Select Factory default and this

box appears. Select [Yes], and

the next box appears.

Factory default

Select [Yes] to activate it.

Remote control

NOTE : The remote control code is reset when the battery is

remove and leaves for a long time.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 63 64

Comments to this Manuals

No comments

Eiki LC-XT9 User Manual Page 41

Comments to this Manuals

Related products and manuals for Projectors Eiki LC-XT9