Eiki LC-XT9 User Manual download pdf (Page 27)

COMPUTER INPUT

This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA, WXGA or UXGA

(refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on page 51-52). When selecting Computer, this projector

automatically tunes to incoming signal and projects proper image without any special setting. (Some computers need setting

manually.)

Note : Projector may display one of following messages.

When projector cannot recognize connected signal as PC

system provided in this projector, Auto PC Adjustment

function operates to adjust projector and message “Auto”

is displayed on SYSTEM Menu icon. (Refer to P28.)

When image is not provided properly, manual adjustment

is required. (Refer to P29 and 30.)

There is no signal input from computer. Make sure

connection of computer and a projector is set correctly.

(Refer to TROUBLESHOOTING on page 47.)

Auto

––––

PC SYSTEM Menu icon

Displays system being

selected.

PC SYSTEM MENU

SELECT COMPUTER SYSTEM MANUALLY

PC SYSTEM Menu icon

Displays system being selected.

Systems on this dialog box can

be selected.

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT buttons to move a red frame pointer to PC

SYSTEM Menu icon.

Press POINT DOWN button to move a red arrow pointer to

system that you want to set, and then press

SELECT button.

PC SYSTEM MENU

Custom Mode (1~5) set in PC

ADJUST Menu. (P29, 30)

This projector automatically selects PC system among those provided

in this projector and PC system can be also selected manually.

AUTOMATIC MULTI-SCAN SYSTEM

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button to move a red frame pointer to

INPUT Menu icon.

Move a pointer to "RGB", and then press SELECT button.

When connect a computer output [5 BNC Type (Red, Green, Blue,

Horiz. Sync and Vert. Sync.)] from a computer to R/Pr, G/Y, B/Pb, H/HV

and V jacks.

WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )

Input 2

INPUT MENU

Move a pointer to RGB and

press SELECT button.

INPUT Menu icon

Move a pointer (red arrow) to

Input 2 and press SELECT

button.

Source Select Menu

Press POINT DOWN button to move a red arrow pointer to Input

2 and then press SELECT button. Source Select Menu will

appear.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 63 64

Comments to this Manuals

No comments

Eiki LC-XT9 User Manual Page 27

Comments to this Manuals

Related products and manuals for Projectors Eiki LC-XT9