Eiki EIP-WX5000L Owner's Manual Page 74

  • Download
  • Add to my manuals
  • Print
  • Page
    / 85
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 73
72
Removing and Installing
the Lamp Unit
Warning!
Do not remove the lamp unit from the pro-
jector right after use. The lamp and parts
around the lamp will be very hot and may
cause burn or injury.
Info
Make sure the lamp unit is removed using
the handle. Make sure the glass surface of
the lamp unit or the inside of the projector
are not touched.
To avoid injury to yourself and damage to
the lamp, make sure you carefully follow
the steps below.
Do not loosen other screws except for the
lamp unit cover and lamp unit.
1 Press STANDBY-ON on the
projector or on the remote con-
trol to put the projector into
standby mode.
Disconnect the power cord and unplug
the power cord from the AC socket after
the cooling fan stops.
The cooling fan may continue to run for
a while even after the power cord is re-
moved.
Leave the lamp until it has fully cooled
down (about 1 hour).
2 Remove the lamp unit cover.
Loosen the user service screw (1) that
secures the lamp unit cover. Remove the
lamp unit cover to slide it in the direc-
tion of the arrow (2).
STANDBY-ON button
Power cord
1
2
User service screw
Optional
accessory
Lamp unit
AH-55001
Regarding the Lamp
Page view 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 84 85

Comments to this Manuals

No comments