Eiki EIP-WX5000L Owner's Manual Page 52
- Page / 85
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
50
33
33
3
Adjusting the Color Temperature
Note
• “CLR Temp” cannot be set when “C.M.S. Ad-
justment” on the “C.M.S.” menu is set to “sRGB”.
(See page 52.)
44
44
4
Selecting the Progressive Mode
*
The film source is a digital video recording with the original
encoded as is at 24 frames/second. The projector can con-
vert this film source to progressive video at 60 frames/sec-
ond with NTSC and PAL60Hz or at 50 frames/second with
PAL50Hz and SECAM to play back a high-definition image.
Note
•
In NTSC or PAL60Hz, even if the 3D Progressive
mode has been set, the three-two pull down enhance-
ment will be enabled automatically when the film
source has been entered.
•
When the image is blurred or noisy, switch to the
optimal mode.
•
When using progressive inputs, inputs are directly
displayed so that “2D Progressive”, “3D Progressive”
and “Film Mode” cannot be selected.
Menu operation Page 47
Selectable items
4500K
10500K
Description
For lower color temperature for warmer,
reddish incandescent-like images.
For higher color temperature for cooler,
bluish, fluorescent-like images.
Description
Useful to display fast-moving images such
as sports and action films.
Useful to display relatively slowmoving
images such as drama and documentary
more clearly.
Reproduces the image of film source*
clearly. Displays the optimized image of film
transformed with three-two pull down (NTSC
and PAL60Hz) or two-two pull down
(PAL50Hz and SECAM) enhancement to
progressive mode images.
Selectable items
2D
Progressive
3D
Progressive
Film Mode
55
55
5
Reducing Image Noise (DNR)
Video digital noise reduction (DNR) provides high
quality images with minimal dot crawl and cross
color noise.
Note
• Set a level so as to view a clearer picture.
Make sure to set “DNR” to “Off” in the
following cases:
• When the image is blurry.
• When the contours and colors of moving im-
ages drag.
• When TV broadcasts with weak signals are pro-
jected.
Info
• This function is available for all signals with
VIDEO or S-VIDEO.
• This function is available for 480I, 480P, 576I
and 576P signals with COMPUTER1/2, DVI or
HDMI.
Description
DNR does not function.
Sets the DNR level.
Selectable items
Off
Level 1–3
Picture Adjustment (“Picture” menu)
- EIP-WX5000 1
- EIP-WX5000L 1
- IMPORTANT 2
- Introduction 3
- PRODUCT DISPOSAL 4
- Pages 79 and 80 5
- Contents 6
- Preparing 6
- Reference 7
- SETUP MANUAL 8
- IMPORTANT SAFEGUARDS 10
- Accessories 13
- Throw Distance 14
- Part Names and Functions 15
- Projector (Rear View) 16
- Remote Control 17
- 2 Insert the batteries 18
- Using the Remote Control 18
- Rear view 19
- Remote control 19
- 2 Slide the ADJ./MOUSE 20
- 3 Use the mouse function 20
- Quick Start 21
- 4. Adjust the angle 22
- 8. Turn the power off 22
- 7. Select the input mode 22
- Setting Up the Projector 23
- Projecting a Reversed Image 25
- Terminals on the Projector 26
- RCA adaptor plug 27
- (commercially available) 27
- * To ensure safety, do not 29
- Turning the Projector On/Off 30
- Image Projection 31
- Using the Adjustment Feet 32
- Adjusting the Focus 33
- Selecting the Type of the 34
- Correction 34
- GEOMETRIC ADJUSTMENT 35
- 1 Press KEYSTONE on the pro 36
- 3 Press \ or 36
- 4 Press KEYSTONE to display 36
- 6 Press KEYSTONE to set the 37
- Switching the Input 38
- Adjusting the Volume 38
- 1 Press MAGNIFY 39
- Freezing a Moving 40
- Selecting the Picture 40
- Resize Mode 41
- 1 Press SHUTTER CLOSE 43
- 2 Pressing SHUTTER OPEN will 43
- 1 Press BREAK TIMER 43
- Menu Items 44
- “Picture” menu 45
- “Audio” menu 47
- “Options 1” menu 47
- Using the Menu Screen 49
- 1 Press MENU 49
- 2 Press 49
- To adjust the projected 50
- Menu operation Page 47 52
- Using the “Options 1” Menu 58
- Function 61
- When the system lock is set 62
- Changing the keycode 62
- 1 Setting a Password 63
- If You Forget Your Password 63
- 2 Select “OK”, and then press 65
- Mild detergent 68
- 2 Remove the filter cover 69
- 4 Replace the filter cover 70
- Maintenance Indicators 71
- Regarding the Lamp 73
- 1 Press STANDBY-ON on the 74
- 2 Remove the lamp unit cover 74
- 3 Remove the lamp unit 75
- 4 Insert the new lamp unit 75
- 1 Connect the power cord 76
- 2 Reset the lamp timer 76
- Computer Compatibility Chart 77
- 2 Remove the lens cover 79
- Attaching the Optional Lens 79
- Troubleshooting 81
- Specifications 83
- 86-21-5396-0088 85
- 86-21-5396-0318 85
Related products and manuals for Projectors Eiki EIP-WX5000L
Projectors Eiki LC-XB23 Owner's Manual
(64 pages)
(64 pages)
Projectors Eiki LC-WB40N User Manual
(2 pages)
(2 pages)
Projectors Eiki LC-6000U User Manual
(2 pages)
(2 pages)
Projectors Eiki AH-69601 Owner's Manual
(84 pages)
(84 pages)
Projectors Eiki LC-XB33N User Manual
(2 pages)
(2 pages)
Projectors Eiki LC-WXL200A Owner's Manual
(61 pages)
(61 pages)
Projectors Eiki LC-XT4U User Manual
(2 pages)
(2 pages)
Projectors Eiki LC-WIP3000 Owner's Manual
(80 pages)
(80 pages)
Projectors Eiki HDT700 User Manual
(57 pages)
(57 pages)
Projectors Eiki LC-XS25 User Manual
(2 pages)
(2 pages)
Projectors Eiki EIP-X350 Owner's Manual
(35 pages)
(35 pages)
Projectors Eiki LC-XT9 User Manual
(25 pages)
(25 pages)
Projectors Eiki LC-HDT10 Instruction Manual
(52 pages)
(52 pages)
Projectors Eiki EIP-4500 Setup Guide
(54 pages)
(54 pages)
Projectors Eiki LC-XB30 Owner's Manual
(64 pages)
(64 pages)
Projectors Eiki LC-XBL26 User Manual
(2 pages)
(2 pages)
Projectors Eiki LC-XS31 User Manual
(2 pages)
(2 pages)
Projectors Eiki LC-WB200 User Manual
(25 pages)
(25 pages)
Projectors Eiki LC-XB22 User Manual
(2 pages)
(2 pages)
Projectors Eiki LC-XB15 Owner's Manual
(56 pages)
(56 pages)
© 2020, manymanuals.com. All rights reserved. | 0.743 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals