Eiki EIP-WX5000L Owner's Manual download pdf (Page 61)

Setting the keycode

1 Select “System Lock” on the “Op-

tions 1” menu, then press

• A message is displayed.

• Read this message, and press ENTER.

2 Press the 4 buttons on the remote

control or on the projector to enter

the preset keycode in “Old Code”.

• When setting the keycode for the first time,

press " on the projector for four times.

Note

• If you input a wrong keycode, the cursor returns

to the first point of the “Old Code”.

• The preset keycode is 4 " buttons on the projec-

tor. If this keycode is set, the keycode input screen

does not appear when turning the power on.

3 Press the 4 buttons on the remote

control or on the projector to enter

the new keycode in “New Code”.

Note

• You cannot use the following buttons for

keycode:

STANDBY-ON, ENTER, L-CLICK, R-CLICK/

UNDO, MENU, ZOOM, FOCUS, H&V LENS

SHIFT

• System Lock function recognizes each but-

ton on the remote control or on the projec-

tor as an individual button, even if they share

the same button name. If you set the keycode

with the buttons on the projector, use only

those buttons on the projector. If you set the

keycode with the buttons on the remote con-

trol, use only those buttons on the remote

control.

w Setting the System Lock

Function

This function prevents unauthorized use of the

projector. Once this function is activated, users

must enter the correct keycode each time the

projector is turned on. We suggest you record

the keycode in a safe place where only autho-

rized users have access.

Info

• If you lose or forget your keycode, contact your

nearest EIKI Authorized Dealer or Service Cen-

ter (see page 81). Even if the product warranty

is valid, the keycode reset will incur a charge.

4 Enter the same keycode in “Recon-

firm”.

Note

Not displaying the keycode input screen

when turning the projector on

• Press " on the projector for four times in steps

3 and 4 above.

When the System Lock is set

• When System Lock is set, the keycode input

screen appears after the power is turned on.

When it appears, enter the right keycode to start

projection. Failure to enter the keycode will

cause images not to be projected even when

signals are entered to the projector.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 84 85

Comments to this Manuals

No comments

Eiki EIP-WX5000L Owner's Manual Page 61

Comments to this Manuals

Related products and manuals for Projectors Eiki EIP-WX5000L