Eiki LC-SD12 Owner's Manual download pdf (Page 36)

Keystone

This function corrects distortion of a projected image. Select either

Store or Reset with the Point

7 8 buttons, and then press the Select

button. The keystone dialog box appears. Adjust keystone with the

Point

eedd

7 8 buttons.

Store . . . . . stores the keystone adjustment even if the AC power

cord is disconnected.

Reset . . . . .resets the keystone adjustment when the AC power

cord is disconnected.

Setting Menu

Press the MENU button to display the On-Screen Menu. Press

the Point

7 8 buttons to move the red frame pointer to the

SETTING icon.

Language

Language used in the On-Screen Menu is selectable from among

English, German, French, Italian, Spanish, Portuguese, Dutch,

Swedish, Russian, Chinese, Korean and Japanese.

Display

This function decides whether to display On-Screen Displays.

On . . . . . .show all the On-Screen Displays.

Off . . . . . .set On-Screen Displays disappeared except;

• On-Screen Menu

• “Power off?” message ( ☞ P17 )

• P-TIMER ( ☞ P21)

• “No signal” message ( ☞ P37 )

• ”Wait a moment!” message

Set the red frame

pointer to the item

and press the

SELECT button.

Press the Point d button to move the red frame pointer to the

item that you want to set. Then press the SELECT button to

display the Setting dialog box.

Blue back

When this function is “On,” the projector will project a blue image

on the screen if any input signal is not detected.

Logo

This function decides what to be displayed on the starting display.

User ···· the image you captured

Default ···· the factory set logo

Off ···· count-down only

Press the SELECT button

at Language to show the

Language Menu.

SETTING MENU

Capture

This function is used to capture the image being projected and use it

for a start-up display. After capturing the projected image, go to the

Logo function (above) and set it as “User”. Then the captured

image will be displayed when turning on the projector next time.

To capture the image, select "Yes". To cancel the Capture function,

select "No".

Before capturing an image, select Standard in the Image Select

Menu to capture a proper image. ( ☞ P27, P33 )

A signal from a computer can be captured up to XGA (1024 x 768).

A signal from video equipment can be captured except for 720p,

1035i, and 1080i. When capturing the image that has been adjusted

by Keystone function, the adjusted data is automatically reset and

the projector captures an image without keystone adjustment.

Select [Yes] to capture

the projected image.

Select [No] to cancel.

Select [Yes] to

stop capturing.

Capture

Setting Menu icon

Setting

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 51 52

Comments to this Manuals

No comments

Eiki LC-SD12 Owner's Manual Page 36

Comments to this Manuals

Related products and manuals for Projectors Eiki LC-SD12