Eiki WL-10 Owner's Manual Page 67
- Page / 79
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
67
Tr oubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
–Make sure you have properly connected the projector to peripheral equipment as described on pages 19–21.
–Make sure all equipment is connected to AC outlet and the power is turned on.
–When the projector does not project an image from the connected computer, restart the computer.
Appendix
Problem: – Solutions
No power – Plug the power cord of the projector into the AC outlet.
– See if the POWER indicator lights red.
– Wait 90-120 seconds after the projector is turned off when turning
the projector back on. The projector can be turned on after the
POWER indicator turns red. See on page 22.
– Check the WARNING indicator. If the WARNING indicator lights red,
projector cannot be turned on. See on page 62.
– Check the projection lamp. See page 65.
– Unlock the Key lock function for the projector. See page 54.
Image is out of focus. – Adjust focus of the projector. See page 26.
– Provide proper distance between the projector and the projection
screen. See page 17.
– Check the projection lens to see if it needs cleaning. See page 64.
– Moving the projector from a cool to warm place may result in
moisture condensation on the projection lens. In such cases, leave
the projector off and wait until condensation evaporates.
No image – Check the connection between your computer or video equipment
and the projector. See page 19–21.
– See if the input signal is correctly output from your computer. Some
laptop computers may need to change the setting for monitor output
when connecting to a projector. See your computer’s instruction
manual for the setting.
– It takes about 30 seconds to display an image after turning on the
projector. See page 22.
– See if the selected system is corresponding with your computer or
video equipment. See pages 32, 42.
– Select correct input source once again through menu operation. See
pages 30–31, 40–41.
– Make sure the temperature is not out of the specified Operating
Temperature (41˚F–95˚F [5˚C–35˚C]).
Image is Left/Right reversed. – Check the Ceiling/Rear function. See page 51.
Image is Top/Bottom reversed. – Check the Ceiling function. See page 51.
No sound – Check the audio cable connection from audio input source.
– Adjust the audio source.
– Press the Volume + button. See page 27.
– Press the Mute button. See page 27.
Downloaded From projector-manual.com EIKI Manuals
- LC-XB40N 1
- Features and Design 3
- Table of Contents 4
- To the Owner 5
- Safety Instructions 6
- Moving the Projector 7
- Air Circulation 7
- Compliance 9
- Corporation 10
- Part Names and Functions 11
- Rear Terminal 11
- Top Control 12
- 7 8 buttons) (p.27) 13
- Pointer Function 14
- Laser Pointer Function 14
- Wireless Mouse Operation 15
- Remote Control Code 15
- Adjustable Feet 16
- Installation 17
- Connecting the AC Power Cord 18
- Connecting to a Computer 19
- Connecting to Video Equipment 20
- Basic Operation 22
- Tu rning Off the Projector 23
- Menu Bar 25
- For computer source 25
- For video source 25
- Keystone Correction 26
- Auto Setup Function 26
- Zoom and Focus Adjustment 26
- Sound Adjustment 27
- Remote Control Operation 28
- • • • • • 29
- Computer Input 30
- Computer System Selection 32
- Auto PC Adjustment 33
- Manual PC Adjustment 34
- Image Mode Selection 36
- Image Adjustment 37
- Screen Size Adjustment 38
- Video Input 40
- Video System Selection 42
- Auto setup 47
- Keystone 48
- Logo select 49
- Enter a Logo PIN code 50
- Change the Logo PIN code 50
- Ceiling 51
- Power management 52
- 7 8 buttons to 53
- Key lock 54
- PIN code lock 54
- Enter a PIN code 55
- Change the PIN code 55
- Factory default 57
- Filter counter 57
- Antitheft Alarm Function 58
- Maintenance and Cleaning 62
- Resetting the Filter Counter 63
- Cleaning the Filter 63
- Cleaning the Projection Lens 64
- Slide Shutter 64
- Lamp Replacement 65
- LAMP HANDLING PRECAUTIONS 66
- Appendix 67
- Menu Tree 69
- Projector Condition 71
- Te c hnical Specifications 74
- Optional Parts 75
- PJ Link Notice 76
- 87654321 77
- PIN Code Number Memo 78
- PIN Code Lock No 78
- Logo PIN Code Lock No 78
- Alarm PIN Code No 78
Related products and manuals for Data projectors Eiki WL-10
Data projectors Eiki LC-SB22 Owner's Manual
(64 pages)
(64 pages)
Data projectors Eiki LC-XB42N Owner's Manual
(108 pages)
(108 pages)
Data projectors Eiki EIP-1 Owner's Manual
(109 pages)
(109 pages)
Data projectors Eiki EIP-25 Owner's Manual
(35 pages)
(35 pages)
Data projectors Eiki LC-XB26 Owner's Manual
(64 pages)
(64 pages)
© 2020, manymanuals.com. All rights reserved. | 0.183 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals