Eiki WL-10 Owner's Manual download pdf (Page 23)

Basic Operation

TO MAINTAIN THE LIFE OF THE LAMP, ONCE

YOU TURN THE PROJECTOR ON, WAIT AT

LEAST FIVE MINUTES BEFORE TURNING IT OFF.

“Power off?” disappears after 4 seconds.

Tu rning Off the Projector

Press the ON/STAND-BY button on the top control or on

the remote control, and “Power off?” appears on the

screen.

Press the ON/STAND-BY button again to turn off the

projector. The POWER indicator starts to blink red, and

the cooling fans keep running. (You can select the level

of fans’ quietness and speed. See “Fan” on page 56.)

At this time, you can unplug the AC power cord even if

the fans are still running.

When the projector has cooled down enough, the

POWER indicator stops blinking and you can turn on

the projector. After it is cooled down completely,

unplug the AC power cord.

✔Notes:

•When the On start function is set to “On,” the projector will be

turned on automatically by connecting the AC power cord to an AC

outlet (p.53).

•Do not operate the projector continuously without rest. Continuous

use may result in shortening the lamp life. Turn off the projector

and let stand for about an hour in every 24 hours.

•The running speed of cooling fans is changed according to the

temperature inside the projector.

•Do not put the projector in a case before the projector is cooled

enough.

•If the WARNING indicator blinks or lights red, see “Warning

Indicators” on page 62.

•While the POWER indicator is blinking, the lamp is being cooled

down and the projector cannot be turned on. Wait until the

POWER indicator stops blinking to turn on the projector again.

Downloaded From projector-manual.com EIKI Manuals

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 78 79

No comments

Eiki WL-10 Owner's Manual Page 23