Eiki LC-X71L User Manual download pdf (Page 27)

COMPUTER INPUT

MANUAL PC ADJUSTMENT

This projector can automatically tune to display signals from most personal computers currently distributed.

However, some computers employ special signal formats which may not be tuned by the Multi-Scan system of

this projector. If this happens, the projector cannot reproduce proper image and it may be recognized as a

flickering; non-synchronized; non-centered; or skewed picture.

Manual PC Adjustment of this projector enables you to precisely adjust several parameters to match with those

special signal formats. This projector has 10 independent memory areas to store those parameters manually

adjusted, which allows you to recall setting for a specific computer whenever you use it.

Note: The PC ADJUST Menu cannot be operated when the digital signal input on the DVI terminal is selected

on PC SYSTEM Menu. (p.25)

Press the MENU button to display the On-Screen Menu.

Press the POINT LEFT/RIGHT buttons to move the red frame

pointer to the PC ADJUST Menu icon.

Press the POINT UP/DOWN buttons to move the red frame

pointer to the desired item, and then press the SELECT

button. An Adjustment dialog box appears. Press the POINT

LEFT/RIGHT buttons to adjust the value.

Eliminate a flicker from the display. Press the POINT LEFT/RIGHT

buttons to adjust the value. (From 0 to 31.)

Fine sync

Adjust the number of total dots in one horizontal period. Press the

POINT LEFT/RIGHT buttons to adjust the number to match your

PC image.

Total dots

Press the POINT LEFT/RIGHT buttons to adjust the horizontal

picture position.

Position H

Press the POINT LEFT/RIGHT buttons to adjust the vertical picture

position.

Position V

Press the SELECT button to show H-sync freq. and V-sync freq. of

the connected computer.

Current mode

Adjusts the clamp level. When the image has a dark bars, try this

adjustment.

Clamp

Press the SELECT

button at the Current

mode icon to show

information of the

computer connected.

Current mode

PC ADJUST MENU

Adjust the horizontal area displayed by this projector. Press the

POINT LEFT/RIGHT buttons to decrease/increase the value.

Display area H

Adjust the vertical area displayed by this projector. Press the

POINT LEFT/RIGHT buttons to decrease/increase the value.

Display area V

PC ADJUST Menu icon

Move the red frame pointer to an item

and press the SELECT button.

Press the POINT LEFT/RIGHT

buttons to adjust the value.

Press the SELECT button at this icon

to adjust “Clamp,” “Display area H,” or

“Display area V.”

Selected Mode

Shows status (Stored/Free)

of the selected Mode.

Press the SELECT button at this icon

to display the previous items.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 61 62

Comments to this Manuals

No comments

Eiki LC-X71L User Manual Page 27

Comments to this Manuals

Related products and manuals for Projectors Eiki LC-X71L