Eiki LC-XB42N Owner's Manual Page 26
- Page / 108
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
26
Chapter 4 Wired LAN configurations
SD
Setting Procedure
Setting procedures and contents differ depending on the LAN installation location.
When installing, consult your system administrator to set up the LAN appropriately.
Connect the LAN cable to the LAN connection terminal of the projector.
Network environment settings
Set the Wired LAN network through the projector menu.
Detailed network settings will be made with browser. Refer to “6. Basic setting and operation” (p43-62).
First, complete the settings described in this chapter before performing steps in “6. Basic setting and
operation.”
1. Turn on the projector and select “Wired” from the input menu of the projector.
The projector’s LINK/ACT Lamp will be on or blink. If the “Wired setting” is “Off”, it will not be on.
Follow step 2 and 3 to blink the lamp.
2. Select “Wired Setting” in the projector menu, and press SELECT button.
Select similar LAN environment among LAN1, 2 and 3 with the Point 7 8 buttons. (LAN1, 2, and
3 are the factory default setting environments. You can select three different environment among
setting LAN1–3. For each setting, refer to the chart on page 31.)
When selecting “Off” in the “Wired setting”, the LAN connection will be cut off. Use the function when
disconnecting the projector from the network.
3. Press the Point 7 8 buttons then the “Please wait...” message will appear and switching operation
will start. Switching will take a while and after completing the operation, the “Ready for use” message
will appear. During the switching period, the projector cannot be operated.
Connecting to the LAN line
LAN Cable
LAN Connection
Terminal
Speed Lamp (Green)
Light according to the
speed of the connected
network.
10 Base-T.........Off
100 Base-T ......On
* When the LAN setting is “Off”, the two lamps
will not be on.
LINK/ACT Lamp (Orange)
Light or blink orange when
the projector is connected
to the network.
26
- Network Set-up and Operation 1
- For Macintosh 1
- Compliance 2
- European Community (EC) 3
- European Community 3
- Safety instructions 4
- Table of contents 5
- LAN Terminal 8
- Wireless LAN 8
- Flow of Image Transfer 10
- An example of the connection 11
- LAN connection modes 12
- LAN connection modes 13
- Chapter 1 About LAN functions 14
- Chapter 15
- Network Capture 5.pkg 17
- Chapter 2 Setup procedures 18
- ● Network Capture 5: 19
- Network Capture 5 window 23
- Setting Procedure 26
- Confirming the operation 28
- The window above appears 29
- Specify IP button 29
- Network Projector list 29
- "0000" 30
- Setting procedures 34
- WEP configuration screen 36
- Available PSK key characters 38
- Hex code .........64 digits 38
- Wireless factory default 39
- Network information 39
- Network PIN code 39
- WIRELESS indicator display 40
- Starting up the Browser 44
- Display of main setting page 45
- Page numbers 45
- How to use the setting page 46
- Type of the setting pallet 47
- Initial setting 48
- Network PIN code setting 49
- PJLink and password setting 49
- Date and time setting 50
- Network configuration 51
- E-mail setting 55
- SNMP setting 59
- Trap check/delete 60
- Trap option 61
- Trap option setting 61
- PJ status 64
- PJ temp 64
- About projector condition 65
- Controls 66
- Image adjustment 68
- Item Description 69
- PC adjustment 70
- Setting up the projector 71
- Lamp counter resetting 73
- How to set the timer 74
- 2 Set an execute time 75
- 3 Select an event action 75
- 4 Register an event 75
- Notes on timer setting 76
- Projector information 77
- Indication of the lamp status 78
- Select Input2 for 79
- PJ1 to PJ4 79
- Start/stop the multi control 80
- Register the projector 81
- Controlling all together 83
- Setting all together 83
- - Real Time Capture (☞p.89) 86
- Commands on the menu bar 87
- Parameter set up 88
- Registering the computers 89
- 1 Start up Network Capture 5 90
- Set "On" when 91
- [3] Control by the projector 92
- Project a screen 93
- Error information 94
- Use of telnet 96
- Command list table 97
- Web browser setting 98
- Examples: OS/Browsers 99
- Proxy setting 100
- 4 Click OK to close setting 101
- Troubleshooting 103
- Infrastructure Mode: 104
- ■ Cannot start up the browser 104
- Network capture 105
- Terminology 106
- Japan & Worldwide 108
Related products and manuals for Data projectors Eiki LC-XB42N
Data projectors Eiki EIP-1 Owner's Manual
(109 pages)
(109 pages)
Data projectors Eiki EIP-25 Owner's Manual
(35 pages)
(35 pages)
Data projectors Eiki LC-XB26 Owner's Manual
(64 pages)
(64 pages)
© 2020, manymanuals.com. All rights reserved. | 0.113 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals